pci-1243u 4-axis stepping motor control universal pci card specifcations pulse type motion control ? motor driver support stepping ? number of axis 4 ? max. output speed 400 kpps ? step count range 0 ~ 16, 777, 215 ? pulse output type pulse/direction, cw/ccw ? position counters 16, 777, 215 ? home modes 4 ? velocity profles t-curve or s-curve acceleration/deceleration ? local i/o interfaces pel x 4, nel x 4, rg x 4, sld x 4, emg x 1 ? general input channels 8 ? general output channels 8 isolated digital input ? channels 8 ? input voltage logic 0: 1 v logic 1: 12 v (24 v max.) ? isolation protection 3,750 v rms ? opto-isolator response 25 s ? input resistance 4.7 kw isolated digital output ? channels 8 ? output type sink (npn) ? isolation protection 3,750 v rms ? output voltage 5 ~ 30 v dc ? sink current 200 ma max./channel; 1.1 a max. total ? opto-isolator response 25 s general ? bus type pci v2.2 ? certifcation ce, fcc class a ? connectors 1 x db-62 female ? dimensions 175 x 100 mm (6.9" x 3.9") ? power consumption typical: 5 v @ 340 ma max.: 5 v @ 500 ma ? storing humidity 5 ~ 95% rh, non-condensing (iec 60068-2-3) ? operating temperature 0 ~ 60c (32 ~ 140f) ? storing temperature -20 ~ 80c (-4 ~ 170f) ordering information ? pci-1243u-ae 4-axis stepping motor control card accessories ? pcl-10162-1e db-62 cable assembly, 1m ? pcl-10162-3e db-62 cable assembly, 3m ? adam-3962-ae db-62 wiring board with din-rail mounting ? 4 axis stepping motor control ? pci universal bus ? up to 400 k pulse output rate ? t-curve acceleration/deceleration ? pulse/dir and cw/ccw pulse output mode ? up 24-bit step count ? opto-isolated digital input and output ? up to 1,500 v rms system isolation ? boardid switch introduction pci-1243u is a 4-axis stepping motor control card with universal pci interface. each axis can be controlled directly through the card's i/o registers. this board is economic solution for stepping motor which provides 4 channels pulse train, t/s speed profle, on-the-fy velocity change and so on. the board is supplied with dll library for windows programmer to write the program. with the dll driver, you can easily link to vc++ ? , visual basic ? or bcb. rohs compliant 2002/95/ec all product specifications are subject to change without notice last updated : 5-may-2015 www.advantech.com/products online download features
|